岩棉复合板在外墙保温系统的指标是耐候性能、防水性能、抗风荷载性能、耐冻的性能等五个方面和指标，下面我们在这5个标准的角度来分析一下岩棉保温系统的性能指标。

The indicators of rock wool composite board in the external wall insulation system are weather resistance, waterproof performance, wind load resistance, frost resistance and other five aspects and indicators. We will analyze the performance indicators of rock wool insulation system from the perspective of these five standards.

1、外墙岩棉复合板系统的耐候性。经过了耐候性的试验之后，保温层不能出现起泡或脱落的现象;抹面层和保温层拉伸的粘接强度要小于0.01MPa和0.1MPa，要保证破坏买呢在保温层中。

1. The weatherability of the exterior wall rock wool composite board system. After the weather resistance test, the insulation layer shall not blister or fall off; the tensile bonding strength of the plastering layer and the insulation layer shall be less than 0.01Mpa and 0.1MPa, and the damage shall be ensured in the insulation layer.

   
   

2、岩棉复合板保温系统给的防水性。保温层的吸水量( 浸水1 h ) , 要控制在1000g / m 2 .

2. Rock wool composite board insulation system to improve the water resistance. The water absorption of insulation layer (soaking for 1 h) should be controlled at 1000g / m2

3、岩棉复合板保温系统的抗风荷载性。不小于工程 项目的风荷载设计值, 抗风压安全系数 K 应不小于1.5.

3. The wind load resistance of rock wool composite board insulation system is analyzed. Not less than the wind load design value of the project, and the wind pressure safety factor K shall not be less than 1.5

4、岩棉板保温系统的耐冻性。 30 次冻融循环后护面层无空鼓、 脱落。

4. The frost resistance of rock wool board insulation system. After 30 freeze-thaw cycles, there was no hollowing or falling off of the protective layer.

5、岩棉板保温材料系统的抗外力破坏性。

5. The results show that the rock wool board insulation material system has good resistance to external force damage.

以上是岩棉复合板保温系统检验的5个标准型指标，达不到指标的保温系统，就是不合格的施工。

The above are the five standard indexes of rock wool composite board insulation system inspection. If the insulation system fails to meet the indexes, it is unqualified construction.

在施工的时候要选择有经验的施工团队，同时也要控制施工材料的性能和质量，才可以保证保温系统的合格。

In the construction, we should choose an experienced construction team and control the performance and quality of construction materials to ensure the qualification of the insulation system.