楼承板这种板材的应用目前来讲是非常广泛的，有人就会问：既然楼承板应用这么好，那它能用来做房子吗？实际上，是可以的！主要是楼承板本身优势足，可利用的性能好，下面来了解了解吧。

　　The application of floor bearing plate is very extensive at present, some people will ask: since the application of floor bearing plate is so good, it can be used to do the house? Actually, yes! It is mainly the floor bearing board itself advantage enough, can use the performance is good, to understand it.

　　楼承板可作为永久性模板，施工方便，有效缩短工期，降低成本；具有优良的力学性能，用作复合楼板时，可全部或部分起到楼板底部钢筋的作用；平坦的底部和均匀的小接缝使板底非常漂亮；减少混凝土和钢材的用量。为减少结构的永久荷载，在高层或超高层建筑中应用更为广泛。

　　Floor bearing plate can be used as permanent template, convenient construction, effectively shorten the construction period, reduce the cost; It has excellent mechanical properties. When used as composite floor, it can play the role of reinforcing bar at the bottom of the floor in whole or in part. The flat bottom and even small seams make the plate bottom very beautiful; Reduce the use of concrete and steel. In order to reduce the permanent load of structure, it is more widely used in high-rise or super high-rise buildings.

　　楼承板做房子时的安装需要认真才行，比如：铺设前对弯曲变形者应矫正好；板梁顶面要保持清洁，严防潮湿及涂刷油漆未干；安装板梁前，应在梁上标出板梁铺放的位置线。铺放板梁时，邻两排板梁端头的波形槽口应对准；应严格按照图纸和规范的要求来散板与调整位置；按照实际排版图进行铺设，连接固定。等等。

　　The installation of the floor plate when the house needs to be serious, such as: the bending deformation should be corrected before laying; The top surface of the plate beam should be kept clean, and damp and dry paint should be prevented. Before installing the plate beam, the position line of the plate beam should be marked on the beam. When the plate beam is laid, the waveform notch at the end of the adjacent two rows of plate beams should be aligned; Should be in strict accordance with the requirements of the drawings and specifications to loose plate and adjust the position; Lay according to the actual layout drawing and fix the connection. And so on.

　　楼承板做房子时的吊装也需要按照标准对待，比如楼承板按图纸放线安装、调直、压实并点焊牢靠，波纹对直，以便钢筋在波内通过；楼承板铺设完毕、调直固定后应及时用锁口机具进行锁口，防止由于堆放施工材料或人员交通，造成压型板咬口分离；安装完毕，应在钢筋安装前及时清扫施工垃圾，剪切下来的边角料应收集到地面上集中堆放。

　　The lifting of the floor plate when the house also needs to be treated in accordance with the standard, such as the floor plate according to the drawing wiring installation, straightening, compaction and spot welding firm, corrugated straight, so that the steel bar in the wave through; After the floor bearing plate is laid and straightened and fixed, it should be locked with the locking machine in time to prevent the separation of pressure plate bite due to the stacking of construction materials or personnel traffic; After the installation, the construction garbage should be cleaned in time before the installation of reinforcement, and the cut off scraps should be collected and piled up on the ground.

　　还有关于济南楼承板施工时的关键要点也要了解，比如：在楼承板施工以前，应根据健全安全生产管理的要求做好安全技术交底，层层落实安全生产责任制；定期与不定期的进行安全检查，经常开展安全教育活动，使全体职工提高自我保护能力；非施工人员禁止进入施工楼层，免焊接弧光灼伤眼睛或晃眼造成摔伤，避焊接辅助施工人员应戴墨镜配合施工。等等。

　　There are also key points about the construction of Ji 'nan floor bearing plate should also be understood, such as: before the construction of the floor bearing plate, according to the requirements of sound safety production management to do a good job of safety technology disclosure, layer upon layer to implement the safety production responsibility system; Regular and irregular safety inspection, often carry out safety education activities, so that all staff to improve self-protection ability; Non-construction personnel are forbidden to enter the construction floor, avoid welding arc light burn eyes or dazzling eyes caused by falling injury, avoid welding auxiliary construction personnel should wear sunglasses to cooperate with the construction. And so on.

　　总之，济南楼承板用来做房子时的注意事项是很多的，不仅关系到房子的整体质量，还关系到施工人员的安全，所以需要严谨起来。更多内容就来我们网站www.jnhxtcg.com咨询咨询吧！

　　In short, ji 'nan floor plate used to do the house is a lot of attention, not only related to the overall quality of the house, but also related to the safety of the construction personnel, so need to be rigorous. Come to our website www.jnhxtcg.com for more information!