济南彩钢瓦现在被普遍使用并发挥偏重要作用,但正确效果的使用仍旧重要。接下来,小编为您介绍彩钢瓦的正确使用技巧。
Jinan color steel tiles are now widely used and play an important role, but the use of the correct effect is still important. Next, I will introduce you the correct use of color steel tiles.
1、彩钢瓦的螺栓头使用不怕水材料密封,以防止外部影响导致生锈。
1. The bolt heads of color steel tiles are sealed with water-proof materials to prevent rust caused by external influences.
2、如果产品由于差别的外部因素和锈斑,应刮掉锈迹,刷或喷相像颜色的油漆。
2. If the product has different external factors and rust spots, the rust shall be scraped off and the paint of similar color shall be brushed or sprayed.
3、根据设计要求进行选择,因为所有厂家的产品都差别,为了包管工作的顺利实现,应该由同一公司同一规格的产品。
3. The selection shall be made according to the design requirements. Because the products of all manufacturers are different, in order to ensure the smooth implementation of the work, the products of the same company and the same specification shall be used.
4、起重和运输过程,防止产品漆膜损坏、表面玷污和碰撞。
4. During lifting and transportation, prevent the product paint film from damage, surface contamination and collision.
5、储存、运输和使用应远离酸、碱、盐、有机溶剂和其余侵蚀性物质;
5. Keep away from acid, alkali, salt, organic solvent and other aggressive substances during storage, transportation and use;
6、在运输时,层和层被薄膜物质的使用隔开,以避免相对滑动和产生磨损。
6. During transportation, layers and layers are separated by the use of film materials to avoid relative sliding and wear.
7、彩钢瓦加工的环境温度应高于7摄氏度,根据板的厚度调整加工辊系统的间隙,并去掉滚轮表面和拖板上的异物,同时搜检板材的双侧是否脱漆,如脱皮,应查明缘故,并采取措施继续处置。
7. The ambient temperature for color steel tile processing shall be higher than 7 ℃. Adjust the gap of the processing roller system according to the thickness of the plate, remove the foreign matters on the roller surface and the carriage, and check whether the two sides of the plate are peeling. If peeling occurs, find out the cause and take measures to continue to deal with it.
8、在正常天色条件下使用,如屋顶产品坡度不低于10度。
8. Use under normal weather conditions, such as the slope of roof products is not less than 10 degrees.
9、严禁用切割机切割彩钢瓦,避免因切割而产生高温金属粉末,避免粘在产品锈蚀。
9. It is strictly prohibited to use a cutting machine to cut color steel tiles, so as to avoid the generation of high-temperature metal powder due to cutting, and avoid sticking to the product rust.
Therefore, you can refer to these 9 operations when using color steel tiles. Of course, you should learn more about each detail and pay attention to us http://www.jnhxtcg.com Learn more!