1、楼承板在装、卸、安装中严禁用钢丝绳捆绑直接起吊，运输及堆放应有足够支点，以防变形。

1. During the loading, unloading and installation of the floor bearing plate, it is strictly forbidden to use steel wire rope to bind and lift directly. The transportation and stacking shall have sufficient supporting points to prevent deformation.

2、铺设前对弯曲变形的楼承板应校正好。

2. The bent and deformed floor bearing plate shall be aligned before laying.

3、功能楼层钢梁顶面要保持清洁，严防潮湿及涂刷油漆未干。

3. The top surface of the steel beam on the functional floor shall be kept clean and strictly protected from moisture and wet paint.

4、下料、切孔采用等离子切割机进行切割，严禁用氧气乙炔火焰切割。大孔洞四周应补强。

4. Blanking and hole cutting shall be conducted by plasma cutting machine, and oxygen acetylene flame cutting is strictly prohibited. Reinforce around large holes.

5、支顶架拆除应待混凝土达到一定强度后方可拆除。

5. The roof support shall be removed after the concrete reaches a certain strength.

6、济南楼承板按图纸放线安装、调直、压实并点焊牢靠。

6. Jinan floor bearing plate shall be set out, installed, straightened, compacted and firmly welded according to the drawing.

7、楼承板铺设完毕、调直固定后应及时用锁口机具进行锁口，防止由于堆放施工材料和人员交通造成压型板咬口分离。

7. After the floor bearing plate is laid, straightened and fixed, it shall be locked with a locking machine in time to prevent the separation of the profiled plate bite due to the stacking of construction materials and personnel traffic.

8、安装完毕，及时清扫施工垃圾，剪切下来的边角料应收集到地面上集中堆放。

8. After the installation, the construction waste shall be cleaned in time, and the cut leftovers shall be collected on the ground for centralized stacking.

9、加强成品保护，铺设人员交通马道，减少人员在楼承板上不必要的走动，严禁在楼承板上堆放重物。

9. Strengthen the protection of finished products, lay personnel traffic berms, reduce unnecessary movement of personnel on the floor bearing plate, and prohibit stacking heavy objects on the floor bearing plate.

此外在进行吊运的时候应当采用专用的软吊索，在每次工作前都应该检查吊索的情况，是否有隔断以及撕裂的情况，如果有应当立马更换。更多相关内容就来我们网站http://www.jnhxtcg.com咨询了解吧！

In addition, special soft slings should be used for lifting. Before each work, the condition of slings should be checked to see if there are partitions and tears. If there are any, they should be replaced immediately. Come to our website for more relevant content http://www.jnhxtcg.com Ask about it!