闭口楼承板经实验证实更具强大的承载力和抗剪力，闭口肋形的特殊设计，让钢承板的板肋完全被混凝土裹护，如同现浇板里的钢筋，从而能够大限度的发挥各自的特性，成功应用于受力配筋的楼承板系统中，并有非常好的耐火性能。那么你知道闭口楼承板与普通开口板相比安装技术优势如何吗？下面济南楼承板厂家为您分析：

The closed floor bearing plate has been proved to have stronger bearing capacity and shear resistance by experiments. The special design of the closed rib shape allows the steel bearing plate's rib to be completely covered by concrete, just like the reinforcement in the cast-in-place slab, so that they can give full play to their respective characteristics, and have been successfully applied to the floor bearing plate system with stress reinforcement, and have very good fire resistance performance. Do you know the advantages of installation technology of closed floor bearing plate compared with ordinary open plate? Jinan floor bearing plate manufacturer will analyze for you:

1．闭口楼承板排板时只需按跨距顺排，与钢梁顺接时，由于板底平整，有足够与钢梁实接面积。因此不用处理可直接铺过去（开口板因要避免与钢梁虚搭而需切割补板）。

1. When arranging the bearing plates of the closed floor, it is only necessary to arrange them in sequence according to the span. When connecting with the steel beam in sequence, due to the flat bottom of the plate, there is enough area to connect with the steel beam. Therefore, it can be paved directly without treatment (the opening plate needs to be cut and repaired to avoid false overlap with the steel beam).

2．开口板在端口处应封堵板，以免浇筑混凝土进从板底开口漏浆，而闭口楼承板因腹板闭合而不用端头堵板。

2. The opening plate shall be blocked at the port to prevent the concrete pouring from leaking from the opening at the bottom of the plate, while the closed floor bearing plate does not need to be blocked at the end due to the closure of the web.

3．闭口楼承板因板底平整，无论与钢梁横搭还是顺搭，均能与钢梁上翼板充分结合，因此钢梁上翼板顶面无需喷防火涂料。而开口型钢承板与钢梁之间具有空洞，需做肩塞补满空洞。

3. Due to the flat bottom of the plate, the bearing plate of the closed floor can be fully combined with the upper flange of the steel beam, regardless of whether it is horizontally or vertically lapped with the steel beam, so the top surface of the upper flange of the steel beam does not need to be sprayed with fireproof paint. However, there is a hole between the open steel bearing plate and the steel beam, so it is necessary to fill the hole with shoulder plugs.

4．闭口楼承板完全替代下层钢筋，减少现场钢筋制作量，可减轻现场劳动量，加快施工速度。同时取消原设计下层钢筋，可为楼板中铺设电线套管提供更大空间。

4. The closed floor bearing plate can completely replace the lower reinforcement, reduce the amount of on-site reinforcement fabrication, reduce the amount of on-site labor and speed up the construction. At the same time, the original design of the lower reinforcement is canceled, which can provide more space for laying wire sleeves in the floor.

另外由于上述优势可明显加快加工速度，缩短工期。因此，采用闭口楼承板一方面可降低工程直接成本，另一方面又可降低工程管道费用。您有怎样的疑惑就来我们网站http://www.jnhxtcg.com咨询吧！

In addition, the above advantages can significantly speed up the processing speed and shorten the construction period. Therefore, the use of closed floor bearing plate can reduce the direct cost of the project on the one hand, and reduce the cost of the project pipeline on the other hand. Come to our website if you have any doubts http://www.jnhxtcg.com Ask!