彩钢瓦的安装给建筑带来了使用的保证。该产品使用牢固美观，但大多数人对其切角过程了解不多。它主要是为了使它的棱角整齐，这样你在使用它的时候就会发现它更加统一。接下来，让我们了解一下济南彩钢瓦的切角过程，感兴趣的朋友可以关注一下。

The installation of color steel tile has brought the guarantee of use to the building. The product is firm and beautiful to use, but most people do not know much about its chamfering process. It is mainly used to make its edges and corners neat, so that when you use it, you will find it more uniform. Next, let's learn about the chamfering process of Jinan color steel tile, and interested friends can pay attention to it.

便携式夹芯板节省了大量的安装时间，因为它相对坚固，不影响建筑物的强度。同时，其防火性能为建筑增加了保证。它被整齐地切割在边缘和角落。在后期施工中，特别是在对齐环节时，它会很轻。

The portable sandwich panel saves a lot of installation time because it is relatively solid and does not affect the strength of the building. At the same time, its fire performance increases the guarantee for the building. It is neatly cut at the edges and corners. In later construction, especially in alignment, it will be very light.

彩钢瓦切角处理方法是什么？

What is the processing method of color steel tile corner cutting?

1.多件斜排切。

1. Multi piece diagonal cutting.

多件线按45度斜角多件排列45度角，彩钢瓦用这种方法切角的加工效率明显是单件切角的多倍

The multi piece line is arranged at a 45 degree angle. The processing efficiency of color steel tile chamfering by this method is obviously multiple times that of single piece chamfering

2.对称切割两件。

2. Cut two pieces symmetrically.

使用此方法，应提前制作一对夹角90度角的靠板。要切角的线沿着靠板两侧的端面朝向端面90度。对齐刀后，切断夹芯板的切角部分，一次可切割两条相互对称切角的线。此方法仅适用于对称切角线。如果工作台允许，也可以同时切割4或8条线。

Using this method, a pair of backup plates with an included angle of 90 degrees should be made in advance. The line to be chamfered faces the end face 90 degrees along the end faces on both sides of the backup plate. After aligning the knives, cut off the corner cutting part of the sandwich panel, and two mutually symmetrical corner cutting lines can be cut at a time. This method is only applicable to symmetrical chamfer lines. If the workbench allows, 4 or 8 lines can be cut at the same time.

3.特殊情况下的切角。

3. Chamfer under special circumstances.

线条应切割成45度角。当彩钢瓦的高度和底部尺寸如此之大，以至于刀片无法切割时，应改变切割角度的方式。新的角度切割方法是将线水平放置，将工作台旋转到一定角度，将刀片旋转到一定角度，调整刀片与线条之间的位置关系，然后切割角度。

The lines shall be cut to a 45 degree angle. When the height and bottom size of color steel tile are so large that the blade cannot cut, the cutting angle shall be changed. The new angle cutting method is to place the line horizontally, rotate the workbench to a certain angle, rotate the blade to a certain angle, adjust the position relationship between the blade and the line, and then cut the angle.

可以看出，彩钢瓦的切角工艺做得很好，产品在后期使用时会相对稳定。然而，如何处理切割后的棱角是我们判断制造商产品质量的标准。因此，我们需要注意，在施工过程中也要注意施工中的裂缝，否则会影响后期使用的整体效果。还有什么不明白的地方，随时来咨询我们http://www.jnhxtcg.com吧！

It can be seen that the corner cutting process of color steel tile is well done, and the product will be relatively stable in later use. However, how to deal with the edges and corners after cutting is the standard for us to judge the quality of the manufacturer's products. Therefore, we need to pay attention to the cracks during construction, otherwise the overall effect of later use will be affected. If there is anything you don't understand, please feel free to consult us http://www.jnhxtcg.com Come on!