1.密度小，可以通过改变和回复形状对外界冲击力进行缓冲，因此具有良好的抗冲击能力;

1. The density is small, and the external impact force can be buffered by changing and restoring the shape, so it has good impact resistance;

2、其表面吸水率低，防渗透性能好，能够有效避免墙面受潮后发霉、脱落等墙面问题;

2. Its surface water absorption is low, and its anti-permeability performance is good, which can effectively avoid wall problems such as mildew and falling off after the wall is damp;

3、具有独立的气泡结构，小面积的损伤不会影响到整面墙体;

3. With independent bubble structure, small area damage will not affect the whole wall;

4、聚苯乙烯泡沫是可回收材料，能够回收使用，其回收程度是塑料中高的;

4. Polystyrene foam is a recyclable material, which can be recycled, and its recycling degree is the highest among plastics;

5、生产工艺中不使用氟利昂，不会产生对臭氧层的破坏;

5. Freon is not used in the production process, which will not damage the ozone layer;

6、不受气温影响。高温时，济南泡沫复合板不会因温度过高而熔化流淌，低温时也不会因为温度过低而发生脆裂现象;

6. Not affected by temperature. At high temperature, foam composite plate will not melt and flow due to high temperature, and at low temperature, it will not embrittlement due to low temperature;

7、全生命周期的能耗在塑料制品中低的。

7. The energy consumption of the whole life cycle is low in plastic products.

8、施工需要挂网，施工过程繁琐，工期长;

8. The construction needs to hang the net, the construction process is cumbersome and the construction period is long;

9、易燃、燃烧后产生有毒气体。普通的泡沫复合板容易燃烧，燃烧产生的烟雾中有毒性，即便添加阻燃剂之后，燃烧性也仅能达到B级;

9. Inflammable and toxic gas generated after combustion. Ordinary foam composite board is easy to burn, and the smoke generated by combustion is toxic. Even after adding flame retardant, the combustibility can only reach Grade B;

10、材料强度差，容易产生开裂现象、保温层脱落现象比较普遍;

10. The material strength is poor, easy to crack, and the phenomenon of insulation layer falling off is relatively common;

11、泡沫复合板由于其自身强度有限，承重能力差，贴面砖时需要进行加强处理;

11. Due to its limited strength and poor load-bearing capacity, foam composite boards need to be strengthened when facing bricks;

12、泡沫复合板质量不稳定，因为材料出厂前需要放置一段时间，经过一段成熟期才可以使用，如果未熟化，质量将无法得到保证，导致泡沫复合板收缩开裂。还有什么产品事项欢迎来我们网站http://www.jnhxtcg.com咨询！

12. The quality of foam composite board is unstable, because the material needs to be placed for a period of time before leaving the factory and can be used after a period of maturity. If it is not matured, the quality will not be guaranteed, leading to shrinkage and cracking of foam composite board. What other product matters are welcome to our website http://www.jnhxtcg.com consulting service