1.首先要检查施工现场的电源情况，使其能够满足栓钉的焊接要求。

　　Firstly, it is necessary to check the power supply at the construction site to ensure that it meets the welding requirements of the bolts.

　　2.施工现场的焊接参数要严格按有关规范明确，图纸上的焊接参数是施工现场的焊接参数指标。

　　2. The welding parameters on the construction site must be strictly defined in accordance with relevant specifications, and the welding parameters on the drawings are the welding parameter indicators of the construction site.

　　3.根椐图纸，在钢梁上进行栓钉的定位后再进行栓钉焊接，不得一边定位一边焊接。

　　3. According to the drawings, position the bolts on the steel beam before welding them, and do not weld while positioning.

　　4.栓钉在焊接后的检验，焊接处的焊肉成型饱满，焊角尺寸要满足要求，在主要构件上逐批的进行1%抽样打弯检验，若焊钉的根部无裂纹，则可认定其通过弯曲检验

　　4. After welding, the inspection of the stud should ensure that the weld meat at the welding point is fully formed and the welding angle size meets the requirements. A 1% sampling bending inspection should be carried out on each batch of the main components. If there are no cracks at the root of the stud, it can be considered as passing the bending inspection

　　本文由济南楼承板友情奉献.更多有关的知识请点击:http://www.jnhxtcg.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Lou Cheng Ban For more information, please click: http://www.jnhxtcg.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.