楼承板压机的研究与开发已经在各个地方进行了试验,这是轻钢发展的重要方向。当前,存在各种低层,多层和高层设计解决方案和示例。 楼承板质量的提高对建筑活动有很大的影响。
The research and development of floor bearing plate press has been tested in various places, which is an important direction of the development of light steel. At present, there are various low-level, multi-layer and high-level design solutions and examples. The improvement of floor bearing plate quality has a great impact on construction activities.
加固的桁架楼承板承重板在举升过程中应轻轻举起和放下,并且不得碰撞以防止发生变化。加固的桁架楼承板可通过特殊的吊架进行装卸,这些吊架由角钢或槽钢制成,并带有软带。请勿使用钢缆直接悬挂,因为电缆的边缘会在提升过程中使板的边缘变形。重复使用后,必须对软吊索进行匹配并立即进行彻底检查。如果损坏,则必须报废并更换。如果没有可用的特殊衣架,则应在其下方放置一个轨枕。如果将钢筋桁架楼承板承重板堆放在起吊位置,则应根据布置图和包装标记进行堆放,并且吊起过程应同时进行。
The reinforced truss floor bearing plate and bearing plate shall be gently lifted and lowered during lifting, and shall not collide to prevent changes. The reinforced truss floor support plate can be loaded and unloaded through special hangers, which are made of angle steel or channel steel with soft belts. Do not use the steel cable to hang directly, because the edge of the cable will deform the edge of the plate during lifting. After reuse, the soft sling must be matched and thoroughly inspected immediately. If damaged, it must be scrapped and replaced. If no special hanger is available, a sleeper shall be placed under it. If the bearing plates of steel truss floor bearing plates are stacked at the lifting position, they shall be stacked according to the layout and packaging marks, and the lifting process shall be carried out at the same time.
楼承板压制设备的钢结构的建造是一个自下而上的过程,该过程从不完整逐步完成。随着施工过程中结构形式的变化。不同的施工阶段具有不同的结构形式和结构。由于其应力特性,每个施工阶段的内部和外部载荷条件也不同。
The construction of steel structure of floor bearing plate pressing equipment is a bottom-up process, which is not completed completely and gradually. With the change of structural form during construction. Different construction stages have different structural forms and structures. Due to its stress characteristics, the internal and external load conditions of each construction stage are also different.
桁架楼承板有效地提高了其使用的建筑材料和产品的质量水平。这是非常重要和重要的。它对建筑活动具有非常积极和重要的影响。这对消费者来说非常重要。
Truss floor support plate effectively improves the quality level of building materials and products. This is very important and important. It has a very positive and important impact on construction activities. This is very important for consumers.
The above is the main content shared by Jinan floor support plate. Please continue to pay attention to us for more wonderful contents: http://www.jnhxtcg.com