楼承板也成为压型钢板,其实楼承板是有很多鲜为人知的优点的,楼承板它凭着这些优势,深得建筑行业的青睐与喜欢。但是它的施工速度有是一点慢的!
Floor bearing plate has also become profiled steel plate. In fact, floor bearing plate has many little-known advantages. With these advantages, floor bearing plate has won the favor and favor of the construction industry. But its construction speed is a little slow!
其实楼承板有:重量轻、强度高、承重大、抗震性好、施工快捷、安全环保,并且能够作为钢结构强度的一部分,从而降低钢筋量、外观整洁等优点。其实正是由于该技术经济性,不仅在楼承建筑和、企业厂房建筑中被广泛采用,而且还在民用建筑中迅速增多的。
In fact, the floor bearing plate has the advantages of light weight, high strength, large load-bearing, good seismic resistance, fast construction, safety and environmental protection, and can be used as a part of the strength of steel structure, so as to reduce the amount of reinforcement, clean appearance and so on. In fact, it is precisely because of the technical economy that it is widely used not only in building construction and enterprise factory buildings, but also in civil buildings.
其实楼承板是可以在很短的时间当中完成作业加工平台,另外在浇灌水泥的过程当中,可以进行分层次的浇灌,从而节约了在使用过程当中的时间以及成本上的节约。
In fact, the floor bearing plate is a processing platform that can complete the operation in a very short time. In addition, in the process of pouring cement, it can be poured in layers, so as to save the time and cost in the process of use.
楼承板施工作业时专业操作人员必须持证上岗的。、带安全帽、挂安全带,安全防护网必须按要求设置完善;施工楼层下方禁止穿行。楼承板只得在铺设时拆包装,禁止存在未焊接固定的楼承板,禁止用桁架楼承板作为临时通道穿行。楼承板在铺设后及时封闭洞口,设护栏并作标识。
Professional operators must work with certificates during the construction of floor bearing plate Wear safety helmet and safety belt, and the safety protection net must be set up and improved as required; It is forbidden to walk under the construction floor. The floor support plate can only be unpacked during laying. It is forbidden to have floor support plates that are not welded and fixed, and it is forbidden to use truss floor support plates as temporary channels. After the floor bearing plate is laid, the opening shall be closed in time, guardrails shall be set and signs shall be made.
施工时应清理检查周边,防止火险发生,并配置专人监督灭火设施。楼承板上面,应避免堆积集中荷载,如钢构件、大型设备等。
During construction, the surroundings shall be cleaned and inspected to prevent fire hazards, and special personnel shall be assigned to supervise the fire-fighting facilities. Concentrated loads, such as steel components and large equipment, shall be avoided on the floor bearing plate.
Jinan floor support board focuses on providing you with fresh industry information. For more questions and wonderful contents, please pay attention to our website: http://www.jnhxtcg.com , we will have more wonderful content for you